BoardPilotMicro SD card module (SPI) with ESP32
Supply 5 V
Bus SPI
Pins and ESP32 wiring
| Pin | Role | ESP32 pin | Notes |
|---|---|---|---|
| GND | Ground | GND | |
| VCC | Power | VIN | This version has a 3.3 V regulator and needs 5 V: use VIN |
| MISO | SPI MISO | D19 | |
| MOSI | SPI MOSI | D23 | |
| SCK | SPI clock | D18 | |
| CS | SPI chip select | D5 |
Suggested wiring for the 30-pin ESP32 DevKit, avoiding flash, input-only and strapping pins. BoardPilot checks it for you as you wire.
This module is sold for 5 V. Its outputs may be 5 V: use a level shifter or a voltage divider on ESP32 inputs.
Sources
- SD Association Physical Layer Simplified Specification, SPI mode
Try it in 3D in BoardPilot
Related parts
CC1101 sub-GHz radio moduleENC28J60 Ethernet moduleLoRa SX1278 (Ai-Thinker Ra-02)nRF24L01 socket adapter (5 V to 3.3 V)nRF24L01+ 2.4 GHz radionRF24L01+ PA/LNA radio with antenna
Part data: CC BY 4.0, free to reuse with credit to BoardPilot.