{
  "id": "sps30",
  "name": "Sensirion SPS30 particulate matter sensor",
  "category": "sensor",
  "measures": [
    "particulates"
  ],
  "pins": [
    {
      "name": "VDD",
      "role": "power",
      "notes": "Pin 1. Needs 5 V: use VIN"
    },
    {
      "name": "SDA",
      "role": "i2c_sda",
      "notes": "Pin 2 (RX/SDA). Add a pull-up to 3.3 V, not 5 V"
    },
    {
      "name": "SCL",
      "role": "i2c_scl",
      "notes": "Pin 3 (TX/SCL). Add a pull-up to 3.3 V, not 5 V"
    },
    {
      "name": "SEL",
      "role": "passive",
      "notes": "Pin 4. Connect to GND to select I2C; leave open for UART"
    },
    {
      "name": "GND",
      "role": "ground",
      "notes": "Pin 5"
    }
  ],
  "bus": "i2c",
  "addresses": [
    "0x69"
  ],
  "voltage": "5",
  "model": {
    "shape": "module",
    "size": [
      41,
      41,
      12
    ],
    "color": "#C9CED4"
  },
  "keywords": [
    "sps30",
    "sensirion",
    "pm2.5",
    "pm10",
    "dust",
    "particulate",
    "polveri sottili",
    "qualità aria"
  ],
  "sources": [
    {
      "title": "Sensirion SPS30 datasheet",
      "section": "Pin 1 VDD, 2 RX/SDA, 3 TX/SCL, 4 SEL, 5 GND; supply 5 V"
    },
    {
      "title": "Sensirion SPS30 datasheet",
      "section": "I2C address 0x69, max 100 kHz, external pull-ups needed"
    }
  ]
}